- Before and after

PlayLawn Installation

The Playlawn DIY kit is easily installed by two people.

1. Choose a level area.
2. Cut the grass as short as possible.
3. Fill any dips with builders sand and remove any high points with a shovel.
4. Lay out the plastic Sportsbase panels and click together to form a uniform base.
5. Cut the panels with a jigsaw to fit the Playlawn into an irregular area.
6. Roll the carpet out on top of the plastic base.
7. Cut the carpet with a sharp knife and, with an electric screwdriver, screw the carpet to the base.
8. Either tuck the carpet under the plastic panels at the edges, and screw in place or, finish the Playlawn with edging of your choice.